RTV Silicone Sealant for General Purpose

Model NO.: C-550 Morphology: Solid-State Material: Silicone Main Agent Composition: Rubber Promoter Composition: Curing Agent Color: Clear N.W.: 280g Packing Detail: 24 PCS/CTN Skin Dry: 10-30 Mins Max Strong Day: After 21 Day Trademark: CSJ Origin: China Bonding Function: Instant Adhesive Application: Construction, Aluminium-Plastic Panel Classification: Room Curing Characteristic: Waterproof Composition: Organic Material G.W.: 340g Cartridge Weight: 60g Packing Size: 30*20*24cm Complete Dry: 4 Days Density: 1.45 Specification: 300ml HS Code: 3506100090 High Grade Neutral Silicone Sealant for General Purpose  (C-550)
 
TECHNICAL DATA SHEET
 
Characteristics:
1. One component
2. Neutral Curing and non-corrosive to metal, coated glass, concrete and marble
3. Non-discoloring. 
4. Excellent adhesion to glass, metal and plastic etc
5. Excellent resistance to low and high temperature, little performance changes between -40 ºC~150 ºC
6. Excellent resistance ultraviolet radiation
7. Odorless
 
Application:
For a wide range of Aluminum doors and windows, plastic steel doors and windows, stainless steel, glass, Aluminum sheet, ceramics, sky light, roof, most of building material. Can not use for coated glass.
 
Limitations:
1.Cannot be used as structural sealant.
2.Not compatible with materials with grease or exudation.
3.The construction surface should be clean and dry.
4.Not applicable to the seal of the immersed, airtight, or comprising substrates like copper, brass and lead, and oil-exudation surfaces.
5.Cannot be used on the substrate surface below 6ºC or above 40 ºC
 
Curing Time:
Track-free Time is between 15 to 20 minutes at room temperature
Completely curing Time is between 48 hours to 96 hours at room temperature.
 
Notices:
1.For best result, use opened cartridges on the same day. Otherwise store it strictly tightened
2.Pre-test is necessary to ensure the excellent adhesive property.
3.Avoid contacting with skin or eyes, in case of contacted, rinse immediately with plenty of water, go to hospital if necessary
4. Keep away from children before curing.
5.Avoid contaminating food, medicine or cosmetics.
 
Color available:
White, grey, black, Others of special order
 
Packaging:
Cartridge: 300 ml   24 cartridges/ctn


Way of use:
1.preparation:clean,de-grease and dry the surface.protect the edges of sealing gap with masking tape;
2.cut the nozzle according to the fissure width,cut off the tube outlet over the thread and screw the nozzle on;
3.application temperature +5c to +30c;
4.extrude silicone by means of cartridge gun;
5.tool the sealant with a wet spatula before formation occurs;
6.up to 15min, remove the masking tape;
7.fresh spots can be clean with water, after hardening mechanically only

Storage and transportation:
1. 12 months stored in a dry and ventilated place below 27ºc in original packaging.
2. non-dangerous, can be transported by train, automobile, ship.
3. Uncured product may irritate eyes. In case of eyes contact, rinse them immediately with water and seek medical aid.
4. Keep out of reach of children.
Testing Standard: GB/T 14683-2003
 

No	Item			The standard	Test result
1	Appearance			Have no grain, no agglomerations, no skinning, and no bubble.	Pass the standard
2	Density (g/cm3)			±0.1	1.438
3	Droop degree mm	Uprightness		≤3	0
		Level		No damage	No damage
4	Skinning time(h)			≤3	0.33
5	Elastic recovery ratio (%)			≥80	92
6	Extrusion ability(ml/min)			≥80	116
7	Tensile modulus  (Mpa)		23ºC	≤ 0.6	0.7
8	Cold-hot adhesive			No damage	No damage
9	Under water adhesive			No damage	No damage
10	UV radiation			No damage	No damage
11	Definite Elongation			No damage	No damage

 





FAQ:

1.Can u send sample to us ?
   Yes, the sample is free.
 
2.Can you give us private design ?
   Yes, we offer OEM service, can making your own brand.
   
3.What's your guarantee?
   10-15 years.
 
4.Can you provide us with your client information ?
    Yes, for checking our company reputation and sample collection.
 
5.How many days to produce one 20'container?
   10-15days.
 
6.Can we visit factory?
   Yes, warmly welcome to visit us at any time.
 
7.What are the documents we provide ?
   Packing list, commercial invoice, CO / FORM E / FORM A , BL making    according to your demand. 
 
 
 

Contact us if you need more details on Adhesive. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Silicone Rubber、Silicone Sealant. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : All Weather Silicone Sealant