Find Sauage Neutral Silicone, RTV Silicone Sealant, Silicone Adhesive on Industry Directory, Reliable Manufacturer/Supplier/Factory from China.

Home > Products > Insulating Glass Silicone Sealant > Domestic Neutral Silicone Sealant for Multi-Purpose

Domestic Neutral Silicone Sealant for Multi-Purpose

Basic Info

Model No.:  C-550

Product Description



Model NO.: C-550


Morphology: Solid-State


Material: Silicone


Main Agent Composition: Rubber


Promoter Composition: Curing Agent


Color: All Color as Customer Requirement


Packing Size: 30*20*24


Density: 1.45


MOQ: 300 Carton


Transport Package: Carton


Origin: China




Bonding Function: Instant Adhesive


Application: Construction, Woodworking


Classification: Room Curing


Characteristic: Waterproof


Composition: Organic Material


Packing Detail: 24 PCS/CTN


Skin Dry: 10-30 Mins


Certificate: MSDS


Trademark: CSJ


Specification: 300ml


HS Code: 3506100090


300ml Professional Manufacturer Neutral General Purpose Silicone Sealant c-550



TECHNICAL DATA SHEET



Characteristics:

1.One component

2. Neutral Curing and non-corrosive to metal, coated glass, concrete and marble

3. Non-discoloring.

4. Excellent adhesion to glass, metal and plastic etc

5. Excellent resistance to low and high temperature, little performance changes between -40 ºC~150 ºC

6. Excellent resistance ultraviolet radiation

7. Odorless



Application:

For a wide range of Aluminum doors and windows, plastic steel doors and windows, stainless steel, glass, Aluminum sheet, ceramics, sky light, roof, most of building material. Can not use for coated glass.



Limitations:

1.Cannot be used as Structural Sealant.

2.Not compatible with materials with grease or exudation.

3.The construction surface should be clean and dry.

4.Not applicable to the seal of the immersed, airtight, or comprising substrates like copper, brass and lead, and oil-exudation surfaces.

5.Cannot be used on the substrate surface below 6ºC or above 40 ºC



Curing Time:

Track-free Time is between 15 to 20 minutes at room temperature

Completely curing Time is between 48 hours to 96 hours at room temperature.



way of use:

1.preparation:clean,de-grease and dry the surface.protect the edges of sealing gap with masking tape;

2.cut the nozzle according to the fissure width,cut off the tube outlet over the thread and screw the nozzle on;

3.application temperature +5c to +30c;

4.extrude silicone by means of cartridge gun;

5.tool the sealant with a wet spatula before formation occurs;

6.up to 15min, remove the masking tape;

7.fresh spots can be clean with water, after hardening mechanically only



Notices:

1. For best result, use opened cartridges on the same day. Otherwise store it strictly tightened

2. Pre-test is necessary to ensure the excellent adhesive property.

3. Avoid contacting with skin or eyes, in case of contacted, rinse immediately with plenty of water, go to hospital if necessary

4. Keep away from children before curing.

5. Avoid contaminating food, medicine or cosmetics.



Color available:

White, grey, black, Others of special order



Packaging

Cartridge: 300 ml 24 cartridges/ctn

Gross weight: 470 g Net weight: 410 g



Storage and transportation:

1. 12 months stored in a dry and ventilated place below 27ºc in original packaging.

2. non-dangerous, can be transported by train, automobile, ship.

3. Uncured product may irritate eyes. In case of eyes contact, rinse them immediately with water and seek medical aid.

4. Keep out of reach of children.







Testing Standard: GB/T 14683-2003

No Item The standard Test result
1 Appearance Have no grain, no agglomerations, no skinning, and no bubble. Pass the standard
2 Density (g/cm3) ±0.1 1.438
3 Droop degree
mm
Uprightness ≤3 0
Level No damage No damage
4 Skinning time(h) ≤3 0.33
5 Elastic recovery ratio (%) ≥80 92
6 Extrusion ability(ml/min) ≥80 116
7 Tensile modulus
(Mpa)
23ºC ≤ 0.6 0.7
8 Cold-hot adhesive No damage No damage
9 Under water adhesive No damage No damage
10 UV radiation No damage No damage
11 Definite Elongation No damage No damage






FAQ:



1.Can u send sample to us ?

Yes, the sample is free.



2.Can you give us private design ?

Yes, we offer OEM service, can making your own brand.



3.What's your guarantee?

10-15 years.



4.Can you provide us with your client information ?

Yes, for checking our company reputation and sample collection.



5.How many days to produce one 20'container?

10-15days.



6.Can we visit factory?

Yes, warmly welcome to visit us at any time.



7.What are the documents we provide ?

Packing list, commercial invoice, CO / FORM E / FORM A , BL making according to your demand.







Contact us if you need more details on RTV Silicone. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Adhesive、Silicone Rubber. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Insulating Glass Silicone Sealant

Email to this supplier
  • *Subject:
  • To:

  • *Messages:
    Your message must be between 20-8000 characters

Premium Related Products