Wide Used, High Adhesive Acid Curing Silicone Sealant.
Model No.: C-363
TECHNICAL DATA SHEET
1. One component
2. Fast acid curing, high strength
4. Excellent adhesive for glass and most building materials.
5. Excellent resistance to low and high temperature, little performance changes between -10~120
1. Joint sealing for high-grade glass assembling.
2. Joint sealing for day lighting roof construction and great glass
3. Joint sealing of side window and rear window glass
4. Joint sealing for small aquarium and tank
5. Assembly for various kinds of windows and doors.
6. General joint and seal
1. Cannot be used as Structural Sealant.
2. Not compatible with materials with grease or exudation.
3. The construction surface should be clean and dry.
4. Not applicable to the seal of the immersed, airtight, or comprising substrates like copper, brass and lead, and oil-exudation surfaces.
5. Unsuitable for the continuous flooding or entire-year moist places.
6. Cannot be used on the substrate surface below 6 centi degree or above 40 centi degree
1. For best result, use opened cartridges on the same day. Otherwise store it strictly tightened
2. Pre-test is necessary to ensure the excellent adhesive property.
3. Avoid contacting with skin or eyes, in case of contacted, rinse immediately with plenty of water, go to hospital if necessary
4. Keep away from children before curing.
5. Avoid contaminating food, medicine or cosmetics.
Clear, white, grey, black, Others of special order
Track-free Time is between 5 to 15 minutes at room temperature
Completely curing Time is between 24 hours to 72 hours at room temperature.
Cartridge: 300 ml 24 cartridges/CTN
Gross weight: 340g Net weight: 280g
Storage and transportation:
12 months stored in a dry and ventilated place below 27 centi degree in original packaging.
Non-dangerous, can be transported by train, automobile, ship.
Testing Standard: GB/T 14683-2003
No Item The standard Test result
1 Appearance Have no grain, no agglomerations, no skinning, no bubble. Pass the standard
2 Density (g/cm3) ± 0.1 0.960
3 Droop degree
Mm Uprightness ≤ 3 0
Level No damage No damage
4 Skinning time (h) ≤ 3 0.2
5 Elastic recovery ratio (%) ≥ 80 98
6 Extrusion ability (ml/min) ≥ 80 105
7 Tensile modulus
(Mpa) 23 centi degree ≤ 0.4 0.36
8 Cold-hot adhesive No damage No damage
9 Under water adhesive No damage No damage
10 UV radiation No damage No damage
11 Definite Elongation No damage No damage
Contact us if you need more details on Silicone Sealant. We are ready to answer your questions on packaging, logistics, certification or any other aspects about RTV Silicone、RTV Silicone Sealant. If these products fail to match your need, please contact us and we would like to provide relevant information.
Premium Related Products