Best Seller Good Quality Mould Proof Gp Silicone Sealant
Model No.: c-891
TECHNICAL DATA SHEET
1. One component
2. Neutral Curing and non-corrosive to metal, coated glass, concrete and marble
4. Excellent adhesion to cabinets, bathroom, glass, metal and plastic etc
5. Excellent resistance to low and high temperature, little performance changes between -20 ºC~150 ºC
6. Excellent resistance to weather, mildew and ultraviolet radiation
Corner and flume in kitchen, sanitary appliance and lavabo in bathroom, water proof and anti mildew bonding in hotels and houses, join fitting and bonding in the construction.
1. Cannot be used as structural sealant.
2. Not compatible with materials with grease or exudation.
3. The construction surface should be clean and dry.
4. Not applicable to the seal of the immersed, airtight, or comprising substrates like copper, brass and lead, and oil-exudation surfaces.
5. Cannot be used on the substrate surface below 6ºC or above 40 ºC
Track-free Time is between 25 to 30 minutes at room temperature
Completely curing Time is between 48 hours to 96 hours at room temperature.
1. For best result, use opened cartridges on the same day. Otherwise store it strictly tightened
2. Pre-test is necessary to ensure the excellent adhesive property.
3. Avoid contacting with skin or eyes, in case of contacted, rinse immediately with plenty of water, go to hospital if necessary
4. Keep away from children before curing.
5. Avoid contaminating food, medicine or cosmetics.
Black, white, grey
Cartridge: 300 ml 24 cartridges/ctn
Gross weight: 470 g Net weight: 410 g
Storage and transportation:
12 months stored in a dry and ventilated place below 27 ºC in original packaging.
Non-dangerous, can be transported by train, automobile, ship.
Testing Standard: GB/T 14683-2003
|No||Item||The standard||Test result|
|1||Appearance||Have no grain, no agglomerations, no skinning, and no bubble.||Pass the standard|
|3||Droop degree |
|Level||No damage||No damage|
|4||Skinning time (h)||≤3||0.5|
|5||Elastic recovery ratio (%)||≥80||95|
|6||Extrusion ability (ml/min)||≥80||124|
|7||Tensile modulus |
|8||Cold-hot adhesive||No damage||No damage|
|9||Under water adhesive||No damage||No damage|
|10||UV radiation||No damage||No damage|
|11||Definite Elongation||No damage||No damage|
Contact us if you need more details on Neutral Mould Sealant. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Gap Filling Glue Mould Proof、Antifungal Aquarium Glass Silicone Sealant. If these products fail to match your need, please contact us and we would like to provide relevant information.
Product Categories : Professional Silicone Adhesive
Premium Related Products