One Component Polyurethane Adhesive for Panel Bonding (Flexibond 8010)

Model NO.: flexibond8010


Morphology: Solvent


Classification: Room Curing


Characteristic: Weatherability


Composition: Organic Material


OEM: Yes


Solid Content: 100


Trademark: Flexibond


Specification: SGS


HS Code: 3506100090




Bonding Function: Pressure sensitive Adhesive


Material: Polyurethane


Main Agent Composition: Polyurethane Elastomer


Promoter Composition: Stabilizer


Color: Tan


Appearance: Liquid


Opentime: 30-40 Minutes


Transport Package: 20kg Pail


Origin: Beijing, China



Name: One Component Polyurethane Adhesive for Panel Bonding (Flexibond 8010)



1.Description


Flexibond 8010 is a one component moisture curable polyurethane adhesive. It has fast curing speed, high bonding strength, good weather resistance, and it is easy to apply.



Technical data:

Component	Heresy isocynate urethane polymer
Appearance:	Yellow to brown viscous fluid
Density (g/cm3):	1.15±0.05
Solid content (%)	100%
Viscosity (mpa.s, 25ºC)	5000±1000
Tack free(mins,23ºC, 50%RH):	16
Shear strength(MPa)	>8

2. Usages


Flexibond 8010 can bond various kinds of metal, wood, honeycomb paperboard, rockwool, and etc.

It is widely used for security doors, wood doors, steel doors, polymer doors.




3. Application


1. Clean the surface of the substrates, which should be of no grease or rust corrosion.


2. In order to insure the bonding strength, the adhesive should be scraped uniformly on the surface of the substrates. The adhesive can be scraped with brush or plastic scraper. The adhesive film cannot be too thick, and the open time cannot be too long.


3. Pay attention to the adhesive spreading speed. It requires fast operations in the summer time. Do not operate the press machine after the adhesive tack free. The adhesive can be processed with cold or hot forming. If processed with cold forming, it takes at least 4-5h; and if processed with hot forming, it takes 20-30mins (recommended temperature is 70-80ºC). The adhesive dosage varies with substrates, normally 100-200g/.




4. Packaging


20kg/pail






4. Storage and Shelf life


The product should be stored in well ventilated, dry and cool place, avoid direct sunlight. The adequate temperature for storage is 15-25ºC. The shelf life is 6 months if stored adequately.




5. Note


1. Operating the adhesive and press machine should be done within the tack free time.


2. The curing speed is affected by the surrounding temperature and humidity. The curing speed can be justed,

3. Seal the lid immediately if there is remained adhesive in the pail in order to avoid its curing.


4. Ethyl acetate can be used to clean the tool or soak the tool in warm water for a few minutes, and then


clean it with soap.


5. Avoid eye contacting and ingestion. If contacting, wash with plenty of water and go to see a doctor.


6. The information and recommendations are given in good faith based on COMENS' current knowledge


and experience of the products when properly stored, handled and applied under normal conditions. The


information must on no account be used as a substitute for necessary prior tests which alone can ensure


that a product is suitable for a given use, due to the practical differences in materials, substrates and actual site conditions.

Users are requested to check that they are in possession of the latest version of this


document and COMENS' is at their disposal to supply any additional information.

Contact us if you need more details on Foam Adhesive. We are ready to answer your questions on packaging, logistics, certification or any other aspects about PU Adhesive、Sandwich Panel. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Pu Adhesive For Furniture And Building Materials