Self-Leveling Moisture Curable PU (Polyurethane) Waterproof Membrane (Comensflex 8269)
Basic Info
Model No.: Comensflex 8269
Product Description
Model NO.: Comensflex 8269
Appearance: Liquid
Method: Roller
Certification: ISO9001
Density (Kg/L): 1.25±0.05
Elongation at Break (%): ≥550
Solid Tontent (%): ≥90
Dry Time (H): ≤12
Shelf Life: 12 Month
Trademark: Comensflex
Specification: ISO9001, ISO14001
HS Code: 3506100090
Color: Black / Grey
Main Raw Material: Polyurethane
Level: Finish Coat
Substrate: Concrete and Others
Tensile Strength (MPa): ≥1.9
Tear Strength (N/mm): ≥10
Tack-Free Time (H): ≤6
MOQ: 1000 Kg
Packaging: 18kg / 25kg Barrel
Transport Package: 25kg Pail
Origin: China
Description
Comensflex8269 is a one component, moisture curable PU (polyurethane) waterproof coating. It is an isocyanate polymer, which before operation, it is a type of amorphous liquid, and after operation, it reacts with moisture in the air and then create a flexible and seamless waterproof layer. It has high tensile strength, good weather resistance, oil resistance, abrasion resistance, acid and alkaline resistance, adaptation to structure pressure deformation, excellent waterproofing and adhesion performances. The coating has a wide range of applications for waterproofing for building and construction.
Usage
For various kinds of underground waterproof projects, such as subway, tunnel, concrete base slab construction in basement, internal and external walls, retaining wall. For various kinds of building's waterproof projects, such as housetop, wash-room, basement, kitchen, swimming pool, flowerbed, sluice gate, expansion joint, contraction joint, wall pipe, aqueduct, etc.
Technical Data
The product appearance and physical property are all accord with enterprise standard 1-C PU waterproof sealant(Q/FTGMH002-2010).
S. No | Item | Data |
1 | Tensile strength (MPa) | ≥1.9 |
2 | Elongation at break (%) | ≥550 |
3 | Tear strength (N/mm) | ≥10 |
4 | Bending performance, -40c | No cracks |
5 | Tack-free time (h) | ≤ 6 |
6 | Dry time (h) | ≤12 |
Detailed Image
Application
The polyurethane waterproof coating Comensflex 8269 is self-leveling, which is suitable for horizontal surface.
Operation course as follows:
1. Basic surface treatment: Remove the earth, floating dust, perished, oil and grout. The basic surface should be made level off, dry and clean, rate of water content≤ 9%
2. Primer application: For dry, solid and clean concrete and mortar surface, the coating could be applied without primer, or Comensflex8269 can be served as primer. When cured, move to the next step.
3. Local enhancement: Some parts of construction should be treated ahead with the purpose of local enhancement, such as expansion joint, snug spot and pipeline joint. After the enhancement service, the overall waterproof operation can be taken.
4. The first coating operation: Scrape a layer of coating uniformly with plastic or rubber scraping panel. The layer should not be too thick or too thin (thickness is around 0.8mm). At the beginning, the operation should be accorded with the size and shape of the surface area, and make an overall plan of applying sequence. Scrape for the second time after the first layer is cured. The scraping method is same as the first time, but the scraping direction of should be vertical with the first time. Scrape for the third time if needed after the second layer is cured.
Consumption: Thickness=1mm, consumption is 1.2kg/m2; Thickness=1.5mm, consumption=1.8kg/m2; Thickness=2mm, consumption is 2.4kg/m2.
5. Make a piece of protection or finish: When the coating operation is finished but not completely cured, clean sand (the sand diameter is no bigger than 2mm) can be scattered on the coating surface, in order to enhance the adhesion between the coating layer and the cement mortar that will be covered on the layer. When the coating is completely cured and it is checked qualified, the cement mortar protection layer or the finish layer can be done.
Color
Grey, black
Packaging
20kg/pail or according to customer's requirement
Storage and Shelf life
Store in dry and cool place (15-25 recommended). Avoid direct sunlight, kept in an original container, the shelf life is 12 months.
Note
Comensflex8269 cannot be applied on dirty surface.
The coating should be used up as soon as possible if the container is opened.
When the coating is being applied, the process should be strictly accord with the instructions.
Avoid contact with skin or eyes, in case of contact, rinse immediately with plenty of water and go to see a doctor.
It is not allowed to be applied in rainy, snowy or heavy wind days.
Our Company and Certificate
Contact us if you need more details on Polyurethane Waterproof Coating. We are ready to answer your questions on packaging, logistics, certification or any other aspects about PU Waterproof Coating、Waterproof Coating. If these products fail to match your need, please contact us and we would like to provide relevant information.
Product Categories : Pu Sealant, Waterproof Coating For Construction
Premium Related Products
Other Products
Hot Products
Multiple Purpose Neutral Sealing High Grade Neutral Silicone SealantCsj-613 Silicone Sealant for Stone C-891 Sanitary SealantTwo Components Silicon Sealant for Insulating Glass Seal and JointHigh Quality Stone Silicone SealantAcetic General Purpose Silicone SealantExcellent Silicone Sealant with Competitive PriceNo Pollution Granite Silicone SealantOne Component Quick Curing Silicone SealantAnti-Mildew Sealant for Kitchen & Bathroom (C-891)Acetoxy Silicone Sealant for General Purpose C-363Two-Component Silicone Sealant for Insulating GlassHigh Performance Weatherproof Silicone Sealant for PVC Skylight CanopyStructural Silicone Sealant for Aluminum Composite PanelsFast Curing Structural Silicone Sealant for Glass Fish TankFast Curing Neutral Silicone Sealant for a Wide Range of Aluminum Doors and Windows