Find RTV Silicone Sealant, General Purpose Silicone Sealant, Weatherproof Silicone Sealant on Industry Directory, Reliable Manufacturer/Supplier/Factory from China.

Home > Products > Outdoor Silicone Sealant > Structural Silicone Sealant > Silicone Sealant/ Splendor Silicone Sealant for Cylindrical Aquarium

Silicone Sealant/ Splendor Silicone Sealant for Cylindrical Aquarium

Basic Info

Model No.:  c-353

Product Description

Model NO.: c-353 Morphology: Solvent Material: Silicone Main Agent Composition: Rubber Promoter Composition: Complexing Agent Color: Clear G.W.: 340g Size: 30*20*24 mm MOQ: 300 Carton Level: High End Quality Shelflife: 12 Month Transport Package: Carton Origin: China Bonding Function: Structural Adhesive Application: Construction, Woodworking Classification: Room Curing Characteristic: Weatherability Composition: Inorganic Material Volume: 300 Ml N.W.: 280g Usage: Tank, Great Glass Raw Material: From Wacker Certification: MSDS Trademark: CSJ Specification: 300ml HS Code: 3506100090 Structural Silicon Sealant for Glass Fish Tank
  
characteristics:
1. one component
2. fast acid curing, high strength
3. non-discoloring. 
4. excellent cohesion for super aquarium and glass and most building materials.
5. raw material imported from wacker
5. excellent resistance to low and high temperature, little performance changes between -20 ºc~120 ºc
 
application:
1. joint sealing for high-grade glass assembling.
2. joint sealing for day lighting roof construction and great glass
3. joint sealing of side window and rear window glass 
4. joint sealing for super aquarium and tank
5. assembly for various kinds of windows and doors.
6. general joint and seal
 
limitations:
1. cannot be used as Structural Sealant.
2. not compatible with materials with grease or exudation.
3. the construction surface should be clean and dry.
4. not applicable to the seal of the immersed, airtight, or comprising substrates like copper, brass and lead, and oil-exudation surfaces.
5. cannot be used on the substrate surface below 6ºc or above 40 ºc
 
notices:
1. for best result results, use opened cartridges on the same day. otherwise store it strictly tightened
2. pre-test is necessary to ensure the excellent adhesive property.
3. avoid contacting with skin or eyes, in case of contacted, rinse immediately with plenty of water, go to hospital if necessary
4. keep away from children before curing.
5. avoid contaminating food, medicine or cosmetics.

way of use:
1.preparation:clean,de-grease and dry the surface.protect the edges of sealing gap with masking tape;
2.cut the nozzle according to the fissure width,cut off the tube outlet over the thread and screw the nozzle on;
3.application temperature +5c to +30c;
4.extrude silicone by means of cartridge gun;
5.tool the sealant with a wet spatula before formation occurs;
6.up to 15min, remove the masking tape;
7.fresh spots can be clean with water, after hardening mechanically only
 
color available:
transparent, Others of special order
 
curing time:
track-free time is between 5-15 minutes at room temperature
completely curing time is between 24 hours to 72 hours at room temperature.
 
storage and transportation:
1. 12 months stored in a dry and ventilated place below 27ºc in original packaging.
2. non-dangerous, can be transported by train, automobile, ship.
3. Uncured product may irritate eyes. In case of eyes contact, rinse them immediately with water and seek medical aid.
4. Keep out of reach of children.
 testing standard: gb/t 14683-2003

technique data sheet:
  
no item the standard test result
1 appearance have no grain, no agglomerations, no skinning, and no bubble. pass the standard
2 density (g/cm3) ±0.1 0.960
3 droop degree
(mm)
uprightness ≤3 0
level no damage no damage
4 skinning time (h) ≤3 0.2
5 elastic recovery ratio (%) ≥80 99
6 extrusion ability( ml/min) ≥80 108
7 tensile modulus
(mpa)
23ºc ≤ 0.4 0.39
8 cold-hot adhesive no damage no damage
9 under water adhesive no damage no damage
10 uv radiation no damage no damage
11 definite elongation no damage no damage 
 




FAQ:

1.Can u send sample to us ?
   Yes, the sample is free.
 
2.Can you give us private design ?
   Yes, we offer OEM service, can making your own brand.
   
3.What's your guarantee?
   10-15 years.
 
4.Can you provide us with your client information ?
    Yes, for checking our company reputation and sample collection.
 
5.How many days to produce one 20'container?
   10-15days.
 
6.Can we visit factory?
   Yes, warmly welcome to visit us at any time.
 
7.What are the documents we provide ?
   Packing list, commercial invoice, CO / FORM E / FORM A , BL making    according to your demand. 
 
 

Contact us if you need more details on White Structural Acetic Sealants. We are ready to answer your questions on packaging, logistics, certification or any other aspects about RTV 100% Silicone Sealant、Weather-Proof Structural Silicone Sealant. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Outdoor Silicone Sealant > Structural Silicone Sealant